This section highlights the differences in how Hon-2 was built or operated
The Chuter-Two was designed to come down in two separate sections, however Hon-2 was meant to come down as one unit, so the shock cord is attached to the payload section and just using one 12 inch parachute for recovery.
Converted the upper body tube to a payload section and used a longer section of BT-50 body tube to accommodate the Jolly Logic Altimeter-One unit, also vent holes are punched in the payload section so the altimeter can function properly.
The nose cone was not glued to the upper body tube
The addition of a 3/16 inch wide launch lug opposite of the 1/8 inch wide launch lug. This way the rocket could use either size of launch rod that an Estes Porta-Pad II launch pad uses.